Personalized Parameter Settings
Personalized Parameter Settings can meet a variety of requirements. 8 settings are Battery Power Bar
Settings, Power Assist Level Settings, Over-current Cut Settings, Power Assist Sensor Settings, Speed Sensor
Settings, Throttle Function Settings, System Settings and Power-on Password Settings. Refer to appendix 1 for
the symbol meanings.
Hold + and - button simultaneously for 2 seconds to enter General Settings and Hold + and - button
simultaneously for another 2 seconds to enter personalized parameter settings interface.
Press + or - button to choose the desired personalized parameter setting item, then press i button to enter the
setting interface.
Personalized setting item cycle interface
◆
Battery Bar Settings
VOL represents voltage settings. Each bar of the battery pack symbol represents a voltage value. Each of the
5 values (31.5V-34.5V-35.6V-37.4V-39.2V ) is to be entered one by one.
For example,
VOL 1 is the first battery
bar and its default value is 31.5V. Press + or - to increase or decrease the voltage value. Press i button to store a
changed setting and access the second battery bar setting. Likewise you can set the values in the same manner
for other bars. After desired values for 5 bars are entered completely, hold i button for 2 s to confirm and return to
previous menu.
Battery bar settings interface
To Next Page
Loading...
