General operations:
◆Switching the E-bike System On/Off
When battery power is on, the display switches on automatically. when battery power goes out, the display
switches off automatically.
When E-bike system is switched off, display does not use the battery power any more. the leakage current is
less than 1 μA.
■When the E-bike is not in use for 5mins, the E-bike system switches off automatically.
◆Display Interface
After switching on the E-bike system, the display shows current Speed and Trip by default.
Press remote “i” button to switch between indication elements below:
Trip Distance (Km)→ ODO (Km)→ Trip Time (Min.)→ Power (Watts)→Max speed (km/h)→Avg speed
(km/h).
Display indication cycle interface
◆Switching Push-assist Mode On/Off
To activate the push-assist function, press and hold the “-” button. After 2 seconds,
E-bike is activated to go at a uniform speed of less than 6 Km/h while the screen displays . .
When “-” button is released, the e-bike will immediately stop power output and return to the state before
Push-assistance mode
To Next Page
Loading...
