◆Assist Level Selection
Briefly press "+" or "-" button to switch between assistance levels so as to change the motor
output power, The default assistance level ranges from level “0” to level “5”, The output
power is zero on Level “0”. Level “1” is the minimum power. Level “5” is the maximum
power. When you reach “5”, press the "+" button again, the interface still shows “5”, and
blinks at“5”to indicate the power highest. After the power downshift reaches “0”, press the
"-" button again, the interface still shows “0” and blinks at “0”to indicate the power minimum.
The default value is level “1”.
Assist Level Interface
◆Battery SOC Indicator
The five battery bars represent the capacity of the battery.The five battery bars are bright
when the battery is in high voltage. When percentage is 0%, the battery needs to be recharged
immediately.
Battery SOC Indication Interface
To Next Page
Loading...
