Keysight Technologies E36100B Series - Page 3

2 SCPI Programming 32
Introduction to the SCPI Language 33
Command format used in this manual 34
Command separators 35
Using the MIN and MAX parameters 35
Querying parameter settings 35
SCPI command terminators 36
IEEE-488.2 common commands 36
SCPI parameter types 36
Error Messages 38
Error codes 38
SCPI Status Registers 42
What is an event register? 42
What is an enable register? 42
Standard Event Status Enable Register 43
Operation Status Register 43
Questionable Register 43
APPLy Subsystem 45
APPLy <voltage>| DEFault | MINimum | MAXimum[,<current>| DEFault | MINimum | MAXimum]APPLy? 45
CALibration Subsystem 46
CALibration:COUNt? 46
CALibration:CURRent[:DATA][:HIGH] <value> 46
CALibration:CURRent[:DATA]:LOW <value> 46
CALibration:CURRent:LEVel[:HIGH] MINimum|MAXimum 46
CALibration:CURRent:LEVel:LOW MINimum|MAXimum 46
CALibration:STATe <state>,<code>CALibration:STATe? 46
CALibration:STRing "<string>"CALibration:STRing? 47
CALibration:VOLTage[:DATA] <value> 47
CALibration:VOLTage:LEVel MINimum|MAXimum 47
CURRent Subsystem 48
[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude] <current> | MINimum | MAXimum |UP | DOWN
[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude]? [MINimum | MAXimum] 48
[SOURce:]CURRent[:LEVel][:IMMediate]:STEP[:INCRement] <current> | DEFault[SOURce:]CURRent[:LEVel]
[:IMMediate]:STEP[:INCRement]? [DEFault] 48
[SOURce:]CURRent[:LEVel]:TRIGgered[:AMPLitude] <current> | MINimum | MAXimum[SOURce:]CURRent
[:LEVel]:TRIGgered[:AMPLitude]? [MINimum | MAXimum] 48
[SOURce:]CURRent:PROTection:CLEar 48
[SOURce:]CURRent:PROTection:DELay[:TIME] <time> | MINimum |MAXimum[SOURce:]CURRent:PROTec-
tion:DELay[:TIME]? [MINimum |MAXimum] 48
[SOURce:]CURRent:PROTection:STATe ON|1|OFF|0[SOURce:]CURRent:PROTection:STATe? 48
[SOURce:]CURRent:PROTection:TRIPped? 48
DISPlay Subsystem 49
DISPlay[:WINDow]:TEXT:CLEar 49
DISPlay[:WINDow]:TEXT[:DATA] "<string>"DISPlay[:WINDow]:TEXT[:DATA] 49
DISPlay[:WINDow][:STATe] ON | 1 | OFF | 0DISPlay[:WINDow][:STATe]? 49
IEEE-488 Subsystem 50
*CLS 50
*ESE <enable value>*ESE? 50
*ESR? 50
*IDN? 50
*OPC*OPC? 51
3
Keysight E36100B Series Operating and Service Guide