Keysight Technologies E36100B Series - Apply Subsystem; Apply <Voltage>| Default | Minimum | Maximum[,<Current>| Default | Minimum | Maximum]Apply

APPLy Subsystem
APPLy <voltage>| DEFault | MINimum | MAXimum[,<current>| DEFault | MINimum | MAXimum]
APPLy?
Specifies and changes the output voltage and current in one command.
– The DEFault, MINimum, and MAXimum values for each mode are shown in Programming Ranges.
– The query returns a quoted string with the voltage setting before the current setting.
– Both values returned by the query have five decimal points: "25.00000,0.75000"
45
Keysight E36100B Series Operating and Service Guide