1 Getting Started
28 Keysight E364xA User’s and Service Guide
When operated over the remote interface, the E364xA power supplies can be both
a listener and a talker. Using an external controller, you can instruct the power
supply to set the output and to send the status data back over the GPIB or
RS-232 interface. Capabilities include the following features:
– Voltage and current programming
– Voltage and current readback
– Present and stored status readback
– Programming syntax error detection
– Complete self-test
The front panel Vacuum-Fluorescent Display (VFD) includes:
– Displaying the actual values of the output voltage and current (meter mode)
– Displaying the limit values of the voltage and current (limit mode)
– Checking the operating status from the annunciators
– Checking the type of error from the error codes (messages)
Front panel binding posts are available to connect load wires for bench operation.
Connections to the power supply’s output and to chassis ground are made to the
rear output terminals.
To Next Page
Loading...
Need help?
General
