Keysight Technologies EL33133A User Manual

Keysight IOLibraries Suite 47
GPIB configuration 47
LAN configuration 48
Using sockets 52
More about IP addresses and dot notation 53
Remote Control 54
Web interface 54
Technical connection details 56
Use the Built-in Help System 57
View the help information for the front panel key 57
View the list of help topics 57
Firmware Update 59
Front Panel Menu Reference 60
2 General Operating Information 61
Turning the Unit On 62
Using the front panel knobs 63
View the error log 63
Controlling the Inputs 64
Step 1 - Select an input (EL34243A only) 64
Step 2 - Set the load operating mode 64
Step 3 - Set the input voltage, current, resistance, or power 64
Step 4 - Enable the input 65
Step 5 - View the input voltage and current 65
Using the Protection Function 67
Protection function 67
Configuring protection 67
Clears OVP, OCP and OPP Event 69
Specifying 2-Wire or 4-Wire Sense 70
Configuring the Input Turn-On/Turn-Off Sequence 71
Step 1 – Set the input voltage, current, power or resistance of the input channels: 71
Step 2 – Configure the turn-on turn-off delays: 71
Step 3 – Coupling selected inputs: 71
Step 4 – Use the All Inputs On and Off keys: 71
Specifying the Load Operating Mode 73
Configuring the Load Settings 74
Operating modes 74
Specifying the Operation Mode (EL34243A only) 78
Using the Digital Control Port 79
Bi-directional digital IO 79
Digital input 81
Fault output 81
Inhibit input 82
Fault/inhibit system protection 83
Trigger input 84
Trigger output 85
Input couple controls 86
Using the Sequencer Function (EL34143A and EL34243A only) 88
LIST mode 88
Step 1– Add/remove steps to/from the LIST 88
Step 2 – Configure the input sequence 89
Step 3 – Run the input sequence list 91
Keysight EL30000 Series User's Guide 3

Keysight Technologies EL33133A Specifications

General

Brand	Keysight Technologies
Model	EL33133A
Category	Accessories
Language	English