445
Keysight Handheld Analyzers
N99xxA User’s Guide
19 Built-in Power Meter Mode – Option 310
Built-in Power Meter (also known as Channel Power Meter) uses the SA input
connector to make quick and simple power measurements over a selectable
frequency band. A power sensor is NOT required.
In this Chapter
See Also
The following Built-in Power Meter settings are identical to the standard Power
Meter settings:
“Frequency/ Span / Step” on page 447
“Radio Standard” on page 448
“How to set Attenuation” on page 448
“Scale” on page 455
“Relative and Offset Power Measurements” on page 456
“Display Units” on page 456
“Averaging” on page 457
“Single or Continuous Measure” on page 457
To Next Page
Loading...
