How to avoid signal loss while working with a spectrum analyzer and Keysight Technologies Portable Generator?
If you are experiencing signal loss while working with a spectrum analyzer and the Keysight Technologies Portable Generator, use one of the unleveled operating modes to avoid reverse power problems.
How to fix the display if it is too dark on Keysight Technologies Portable Generator?
To fix a display that is too dark to read on the Keysight Technologies Portable Generator, use the figure in “Display Settings” on page 39 to locate the brightness softkey and adjust the value so that you can see the display.
Why does pressing Preset perform a user preset on Keysight Technologies N5166B CXG?
If pressing Preset performs a user preset on your Keysight Technologies Portable Generator, send the command :SYST:PRESet:TYPE NORM. This is due to the use of a backward–compatible SCPI command.
What to do if instrument state is saved but the register is empty on Keysight Technologies N5166B CXG?
If the instrument state is saved but the register is empty or contains the wrong state on the Keysight Technologies Portable Generator, recall register 99.
General| Frequency Range | 9 kHz to 6 GHz |
|---|---|
| I/Q Modulation | Yes |
| Power Requirements | 100 to 240 VAC, 50/60 Hz |
| Modulation Types | AM, FM, PM, Pulse, FSK, PSK, QAM |
| Interface | LAN, USB, GPIB |
| Waveforms | Pulse, Arbitrary |
| ARB Waveform Memory | 64 MSa |
| Connectivity | LAN, USB, GPIB |
| Switching Speed | <900 μs |
To Next Page
