Installation Note N5222-90131 83
Description of the Upgrade
Installation Procedure for the Upgrade
Step 52. Verify the PNA Analyzer Program is Running with the Correct
Options
1. Start the Network Analyzer program.
2. Once the Network Analyzer program is running:
— Press Help > About NA and verify that Option 420 is listed in the
PNA application.
3. After successful installation of all upgrades, some features require some
adjustments to ensure the instrument meets its specified performance.
Refer to the following Web site: http://na.support.keysight.com/pna.
If the option is still not enabled or if your old option(s) have been removed,
contact Keysight Technologies. Refer to “Getting Assistance from
Keysight” on page 4.
To Next Page
Loading...
Need help?
General
