Need help?Do you have a question about the Keysight DAQ973A and is the answer not in the manual?
General| Brand | Keysight |
|---|---|
| Model | DAQ973A |
| Category | Analytical Instruments |
| Language | English |
Covers safety checks before applying power and instrument grounding.
Safety procedures for powering on/off and removing instrument covers.
Prohibits operation in explosive atmospheres, modification, and exceeding voltage limits.
Covers troubleshooting steps, checklists, and self-test procedures.
Details on battery replacement and instrument disassembly.
Description of the automatic self-tests performed on power-on.
Procedures for performing a complete self-test and module self-tests.
Step-by-step instructions for checking and replacing the internal battery.
Procedures for Zero and Gain adjustments of the internal DMM.
Procedures for Zero and ADC, AC Zero, and Capacitance Zero calibrations.
Procedures for Gain and Flatness adjustments for various functions.
Specific procedure for zero and ADC calibration.
Specific procedure for AC zero calibration.
Specific procedure for capacitance zero calibration.
A simple method to achieve high confidence in instrument operation.
Acceptance tests to verify measurement performance against specifications.
Procedures to verify the performance of the internal DMM.
Checking the full scale reading accuracy of the internal DMM.
Checking the zero offset performance for DMM functions and ranges.
Procedures for verifying gain in DC voltage, Ohms, and DC current functions.
Specific test procedure for DC voltage gain verification.
Specific test procedure for Ohms gain verification.
Specific test procedure for DC current gain verification.
Specific test procedure for AC voltage gain verification.
Specific test procedure for AC current gain verification.
To Next Page
