Keysight E5052B Signal Source Analyzer 15
Installation
Environmental Requirements
Protection Against Electrostatic Discharge (ESD)
Set up a static-safe work-station to protect the electronic components from
the damage by the electrostatic discharge (ESD) as shown in Figure 2-2.
Figure 2-2 Example of the static-safe work-station
Ensuring Adequate Free Space around Analyzer for Immediate Disconnection of
Power Cable in Case of Emergency
As described in “Disconnection from Supply Source” on page 25, the power
supply is disconnected by removing the power cable’s connector plug from
either the AC outlet or the E5052B unit. When installing the E5052B, ensure
that there is sufficient free space around the unit to permit quick disconnection
of the plug (from AC outlet or E5052B unit) in case of emergency.
To Next Page
Loading...
