16 Keysight E5052B Signal Source Analyzer
Installation
Installing Front Handles/Rack Mounting Flanges
2-
Installing Front Handles/Rack Mounting Flanges
The E5052B can be installed on a workbench or in a rack. This section
describes how to install the front handles (Option 1CN) used for moving or
transporting the instrument, and how to install the analyzer in an equipment
rack as part of a measurement system (Option 1CM: without the handles,
Option 1CP: with the handles).
Table 2-1 Keysight E5052B handles/rack mounting options
Option Name Keysight Part
Number
1CN Handle Kit 5063-9230
1CM Rack-mount Kit 5063-9217
1CP Rack-mount and Handle Kit 5063-9224
Table 2-2 Contents of each option
Option Contents Quantity
1CN Front Handles 2
Screws 6
Trim Strips 2
1CM Rack-mounting flanges (locking side plate) 2
Screws 6
1CP Rack-mounting flanges (locking side plate) 2
Front Handles 2
Screws 8
To Next Page
Loading...
