Keysight E5052B - User Recovery (Only for HDD Revision NM320 or Below)

52 Keysight E5052B Signal Source Analyzer
Troubleshooting
System Recovery
3-
User Recovery (only for HDD Revision NM320 or below)
Procedure to create the user backup image (only available when HDD
Revision is NM320 or below)
This section describes how to create the user backup image. The C and F
drives’ contents saved in this procedure are recalled when the user recovery
function is executed.
Step 1. Close the E5052B application by pressing System > Service Menu >
Administrator Menu > Exit E5052B > OK.
Step 2. Close all other applications you currently open.
Step 3. From the Windows start menu, select All Programs > Acronis > Acronis True
Image.
Step 4. Click “No, Thanks” button.
Figure 3-18 Recover User Backup
e5071cse1080