Getting Started Guide 13
Safety & Environmental Information
Environmental Conditions (Operating)
Environmental Conditions (Operating)
This product is designed for use in the following conditions:
— For indoor use only
— Altitude up to 2000 m (10,000 feet)
— Temperature 10° to 40° C
—Maximum Relative Humidity: 5% to 85% non-condensing
— OVERVOLTAGE CATEGORY II and Pollution degree 2
Environmental Information
Samples of this product have been type tested in accordance with the Keysight
Environmental Test Manual and verified to be robust against the environmental
stresses of Storage, Transportation and End-use; those stresses include but
are not limited to temperature, humidity, shock, vibration, altitude and power
line conditions.
Test Methods are aligned with IEC 60068-2 and levels are similar to
MIL-PRF-28800F Class 3.
This product is designed for use in INSTALLATION CATEGORY II and
POLLUTION DEGREE 2.
From 40° C to 45° C, the maximum % Relative Humidity follows the line of
constant dew point.
To Next Page
Loading...
