Getting Started Guide 61
Front and Rear Panel Functions
Rear Panel Features
PCM
Figure 4-10 UXM 5G Rear Panel -- PCM Connectors
These connectors relate to the DCB+ circuit board within the UXM 5G.
AC Power
The E7515B requires two AC power inputs. Both AC inputs must be connected
and powered to operate the instrument. If either of the two inputs is not
present, the instrument will not boot (or will shut down, if already in operation).
See “AC power safety” on page 18 for more information.
Name Description Notes
SS USB Four USB 3.0 ports. (The front-panel USB ports are USB 2.0.)
Audio In 3.5 mm stereo Audio jack connector for input.
Audio Out 3.5 mm stereo Audio jack connector for output.
Some E7515B instruments have an older power supply design, which includes
only a single AC power input.
To Next Page
Loading...
