Keysight E7515B UXM 5G User Manual

Getting Started Guide 77
Test Platform Operating System
Updating the Keysight E7515B UXM 5G software
Updating the Keysight E7515B UXM 5G software
The following steps are required to upgrade your Keysight E7515B UXM 5G
firmware. Downgrading to an earlier version is also possible, using the same
process.
Using the E7515B/E7515B UXM 5G Firmware Update Tool
Step Notes
1. Connect a USB keyboard and
mouse to the instrument
Log in as follows:
User Name: Administrator
Password: Keysight4u!
Obtain the latest version of software
installer.
Download it from the site:
www.keysight.com/find/softwaremanager
Launch
Firmware Upgrade Tool from
the Windows menu at the lower left corner
of the desktop (it should be under
Keysight E7515B UXM 5G).
If this application is not installed, download the latest recommended
version of “Keysight E7515B/E7515B UXM 5G Firmware UpdateTool”
from the site:
www.keysight.com/find/softwaremanager
2. In the “UXM 5G Update Tool” add
the software installer program
obtained in the step 4.
Right-click on the Windows “Select firmware version:” and Add it.
Select the desired software installer and
click the
Update UXM5G Firmware
button.
If the instrument belongs to an Array, the instrument is exited from
Array.
When prompted to continue with the
Firmware update, select
Yes.
The Firmware Update Tool will warn if a system restart is required for
completing the uninstallation/installation.
If a system restart is required, a
confirmation message will appear when
restart is needed. In that case, when
prompted to continue with the restart,
select
Yes.
This typically happens when Microsoft .NET Framework must be
updated.

Keysight E7515B UXM 5G Specifications

General

Brand	Keysight
Model	E7515B UXM 5G
Category	Test Equipment
Language	English