218 Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide
20 Save/Recall (Setups, Screens, Data)
4 Finally, press the Press to Save softkey.
A message indicating whether the save was successful is displayed.
See Also • "To add an annotation" on page 87
To save CSV, ASCII XY, or BIN data files
Data files can be saved to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select CSV data
(*.csv), ASCII XY data (*.csv), or Binary data (*.bin).
2 Press the softkey in the second position and use the Entry knob to navigate to
the save location. See "To navigate storage locations" on page 221.
3 Press the Settings softkey.
In the File Settings menu, you have these softkeys and options:
• Setup Info — when enabled, setup information (vertical, horizontal, trigger,
acquisition, math, and display settings) is also saved in a separate file with a
TXT extension.
• Length — sets the number of data points that will be output to the file. For
more information, see "Length Control" on page 219.
• Save Seg — when data is acquired to segmented memory, you can specify
whether the currently displayed segment is saved or all acquired segments
are saved. (See also "Saving Data from Segmented Memory" on page 143.)
4 Finally, press the Press to Save softkey.
A message indicating whether the save was successful is displayed.
When saving screen images, the oscilloscope uses the last menu visited before pressing the
[Save/Recall] key. This lets you save any relevant information within the softkey menu area.
To save a screen image showing the Save/Recall menu at the bottom, press the [Save/Recall]
key twice before saving the image.
You can also save the oscilloscope's display image using a web browser. See "Get
Image" on page 254 for details.
To Next Page
Loading...
