97
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes
User's Guide
11 Triggers
Adjusting the Trigger Level / 99
Forcing a Trigger / 99
Edge Trigger / 99
Pulse Width Trigger / 102
Pattern Trigger / 104
Rise/Fall Time Trigger / 106
Setup and Hold Trigger / 107
Video Trigger / 108
Serial Trigger / 118
A trigger setup tells the oscilloscope when to acquire and display data. For
example, you can set up to trigger on the rising edge of the analog channel 1 input
signal.
You can adjust the vertical level used for analog channel edge detection by
turning the Trigger Level knob.
In addition to the edge trigger type, you can also set up triggers on pulse widths
or video signals. On DSOX1200-Series models, you can additionally set up
triggers on patterns, rise/fall times, or setup and hold violations.
To Next Page
Loading...
