Keysight N5227A - Rear-Panel Assembly, All Options

6-70 Service Guide N5227-90001
Replaceable Parts PNA Series Microwave Network Analyzers
Replaceable Parts Listings N5227A
Rear-panel Assembly, All Options
Item Number
Part
Number
Qty Description
➀
N5245-00028 1 Power supply bracket, rear-panel
➁
0515-0372 --
Machine screw, M3.0 x 8, pan head (To attach: cpu assy to ejector arms
and left and right side inner brackets; rear-panel to chassis; power
supply bracket to the power supply and rear-panel; handler I/O cable to
rear-panel; test set deck to rear-panel.)
➂
N5242-60088 1 Solid state drive module
➃
Rear foot and screw (Refer to “External Hardware and Miscellaneous Parts, All Options” on
page 6-80.)
➄
6960-0149 1 Hole plug
➅
2190-0958 
Was 2190-0034
-- Lock washer
➆
0380-0644 -- Jack screw
➇
N5247-00010 1 Rear-panel
➈
3050-2330 -- Lock washer (For A24 IF MUX board connectors.)
➉
2950-0414 -- Hex nut (For A24 IF MUX board connectors.)
2190-0584 -- Lock washer
0380-4670 -- Jack screw, 0.442 inch length
1251-7812 -- Jack screw, 0.442 inch length
N5242-60005 1 PWR I/O cable assembly
1253-8234 1 Connector-D-subminiature filter adapter
9170-2235 1 Ferrite for PWR I/O ribbon cable assembly
1810-0118 2/3 Termination, 50 ohm load (2-port, qty 2; 4-port, qty 3)
8121-0834 1 HANDLER I/O cable assembly
9170-2236 1 Ferrite for HANDLER I/O ribbon cable assembly
2190-0068 -- Lock washer (for rear-panel BNC connectors)
2950-0054 -- Hex nut (for rear-panel BNC connectors)
Bottom foot (Refer to “External Hardware and Miscellaneous Parts, All Options” on page 6-80.)
2190-0102
--
Lock washer (for item )
2950-0035
--
Hex nut (for item )
8120-5063 2 BNC cable
11
12
13
14
15
16
17
18
19
20
21
22
24
23
24
24