Keysight N5227A - Miscellaneous Part Numbers

6-82 Service Guide N5227-90001
Replaceable Parts PNA Series Microwave Network Analyzers
Replaceable Parts Listings N5227A
Miscellaneous Part Numbers
Table 6-3 Part Numbers for Miscellaneous Parts and Accessories
Description
Model or Part
Number
Service Tools
1/4 inch and 5/16 inch open-end wrench, thin profile 8710-0510
5/16 inch (8 mm), open-end wrench 8710-2174
1/2 inch to 9/16 inch (8 mm), open-end wrench 8710-1770
20 mm open-end torque wrench; 0.9 N-m (8 in-lb) 8710-1764
9 mm open-end torque wrench; 2.38 N-m (21 in-lb) Not sold by Keysight
Spanner wrench 08513-20014
Documentation
Installation and Quick Start Guide (for all PNA series analyzers) (Cannot be ordered. Part
number is for reference only. Must be printed from the Keysight Web site. Refer to “Printing
Copies of Documentation from the Web” on page iii.)
E8356-90001
Service Guide. (Not available in printed form. Part number is for reference only. Must be
printed from the Keysight Web site. Refer to “Printing Copies of Documentation from the
Web” on page iii.)
N5227-90001
GPIB Cables/GPIB Adapter
GPIB cable, 0.5 meter (1.6 feet) 10833D
GPIB cable, 1 meter (3.3 feet) 10833A
GPIB cable, 2 meter (6.6 feet) 10833B
GPIB cable, 4 meter (13.2 feet) 10833C
GPIB cable to GPIB cable adapter 10834A
Fuses
rear-panel Bias Input Fuse; Ports 1, 2, 3, and 4 (0.5 A, 125 V)
2110-0824 
Was 2110-0046
Protective Covers for Connectors
Cap, protective, 0.812-ID 1401-0214
Cap, protective, 0.625-ID 1401-0225
Cap, protective, 1/4 - 36 threads 5188-5406
Battery
Battery, lithium manganese dioxide, 3V, 0.22A-hr. (located on A21 CPU board assembly) 1420-0356
Protective Guards for Front Panel Jumpers
Protective guard for side jumpers N5242-00029
Protective guard for center jumpers (4-port models only.) N5242-00030