Keysight N5227A - IF Gain Adjustment; Synthesizer Bandwidth Adjustment

Service Guide N5227-90001 3-41
PNA Series Microwave Network Analyzers Tests and Adjustments
N5227A Adjustments
IF Gain Adjustment
The IF gain adjustment is used to adjust the IF gain of the network analyzer.
Procedure
1. Press UTILITY , then , then , then click IF Gain Adjustment.
2. Follow the instructions and prompts as they are displayed.
Synthesizer Bandwidth Adjustment
This adjusts the bandwidth of the 13.5 GHz synthesizers.
Procedure
1. Press UTILITY , then , then , then click Synthesizer Bandwidth Adj.
2. Follow the instructions and prompts as they are displayed.
System
Service
Adjustments
System
Service
Adjustments