Service Guide N5227-90001 3-39
PNA Series Microwave Network Analyzers Tests and Adjustments
N5227A Adjustments
Adjustments
These adjustments are firmware-driven tests that are used to fine-tune your analyzer.
If multiple adjustments are to be performed, perform them in the order listed.
• “10 MHz Frequency Reference Adjustment” on page 3-40
• “IF Gain Adjustment” on page 3-41
• “Synthesizer Bandwidth Adjustment” on page 3-41
• “Source Adjustment” on page 3-42
• “Receiver Adjustment” on page 3-44
• “Receiver Characterization” on page 3-46
• “EE Default Adjustment” on page 3-46
These adjustments are described on the following pages.
To Next Page
Loading...
