Service Guide N5227-90001 6-83
PNA Series Microwave Network Analyzers Replaceable Parts
N5227A Replaceable Parts Listings
Analyzer Accessories
Pulse I/O Adapter (For connecting between the analyzer’s rear-panel PULSE I/O connector
and the coaxial inputs and outputs of external pulse generators and external pulse
modulators.)
N1966A
USB Accessories
Mouse 1150-7799
Keyboard (U.S. style) 1150-7896
USB to GPIB adapter 82357B
ESD Supplies
Adjustable antistatic wrist strap 9300-1367
Antistatic wrist strap grounding cord (5 foot length) 9300-0980
Static control table mat and earth ground wire 9300-0797
ESD heel strap 9300-1308
Rack Mount Kits and Handle Kits
Rack mount kit for analyzers without handles (Option 1CM) N5231AU-1CM or
N5232AU-1CM or
N5239AU-1CM
Option 1CM includes the following separately orderable items:
Rack mount kit (rack mount flanges and hardware) 1CM042A
Was 5063-9217
Rack mount rail set E3663AC
Rack mount kit for analyzers with handles (Option 1CP) N5231AU-1CP or
N5232AU-1CP or
N5239AU-1CP
Option 1CP includes the following separately orderable items:
Rack mount kit (rack mount flanges and hardware) 5063-9237
Rack mount rail set E3663AC
Front handle kit (two classic
a
handles and hardware)
5063-9230
a. For rack mount use, you must replace factory installed ruggedized handles (thick aluminum, no trim) with classic
handles (thin aluminum with plastic trim), included with Option 1CP.
Table 6-3 Part Numbers for Miscellaneous Parts and Accessories (Continued)
Description
Model or Part
Number
To Next Page
Loading...
