Keysight S5040A Open RAN Studio Player and Capture Appliance User’s Guide 15
Setting up the S5040A Appliance 1
Voltage Fluctuations Note that the mains supply voltage fluctuations are not to exceed
±10% of the nominal supply voltage. Temporary overvoltages may not
exceed the allowed voltage fluctuations of +10% nominal.
Pollution Degree The S5040A Appliance may be operated in environments of Pollution
Degree 2.
Pollution Degree
Definitions
Pollution Degree 1: No pollution or only dry, non-conductive pollution
occurs. The pollution has no influence. Example: A clean room or
climate-controlled office environment.
Pollution Degree 2. Normally only dry non-conductive pollution
occurs. Occasionally a temporary conductivity caused by
condensation may occur. Example: General indoor environment.
Pollution Degree 3: Conductive pollution occurs, or dry,
non-conductive pollution occurs which becomes conductive due to
condensation which is expected. Example: Sheltered outdoor
environment.
Characteristic Rating / Range / Description
To Next Page
Loading...