74 Keysight S5040A Open RAN Studio Player and Capture Appliance User’s Guide
4 Troubleshooting
Firmware Update error
If the Firmware Update Progress area turns red, as shown in Figure 48, try
updating the firmware again.
Figure 48 Error during Firmware Update Progress
If unsuccessful after multiple attempts, contact your local Keysight
Technologies representative for technical assistance.
If there is a problem with a firmware update (such as, power interruption
during the update), the S5040A Appliance boots into a different mode,
where you should try to update the firmware again. If such a condition
occurs, the front LEDs will flash Red/Green/Off continuously until powered
off.
To Next Page
Loading...