46 Keysight S5040A Open RAN Studio Player and Capture Appliance User’s Guide
2 Getting Started
Initial boot sequence
After the S5040A Appliance is powered on for the first time, the following
elements are displayed on the connected monitor in the sequence listed
below:
Table 12 Elements displayed in the initial boot sequence
Sequence# Element displayed Action to be performed
1 Loading files... –
2 Logo for Windows 10 –
3 Logo for Keysight Technologies –
4 Keysight Software End-User
License Agreement
Read the license terms carefully and click
Agree to proceed
5 Logo for Keysight Technologies
along with a prompt with the text
“Welcome. System will now reboot
into Windows.”
Click OK to proceed
6 Logo for American Megatrends
along with BIOS version
information
–
7 Logo for Windows 10 –
8 Choose an operating system
• Windows 10
• Instrument Image Recovery
System
Do one of the following:
• Wait for a few seconds. By default,
Windows 10 is set to run
automatically after this screen is
displayed
• Click Windows 10
• Click Instrument Image Recovery
System. Refer to the section
“Performing Instrument Image
Recovery” in this document for more
information
9 Windows 10 desktop with the
background displaying logo for
Keysight Technologies
Launch required software from the Start
menu.
To Next Page
Loading...