Keysight S5040A - Connecting Power to the S5040 A Appliance

Keysight S5040A Open RAN Studio Player and Capture Appliance User’s Guide 19
Setting up the S5040A Appliance 1
Connecting power to the S5040A Appliance
Table 6 Power requirements for the S5040A Appliance
Connect the power cord to the rear of the S5040A Appliance, then to a
suitable AC voltage source. An orange / amber light appears on the power
button to indicate that a standby power is applied to the S5040A
Appliance.
Route the power cord so the Appliance's feet do not pinch the cord.
The power cord is the disconnecting device for Mains. Position the
equipment so the power cord is easily reached by the operator.
Attribute Ratings
Power ~ 100 - 120 V, 50/60/400 Hz
~ 100 - 240 V, 50/60 Hz
450 Watts MAX
CAUTION
Use only the power cord that came with the S5040A Appliance.
The power cord provided is matched to the country of origin of the order.
WARNING
To avoid electric shock, be sure the S5040A Appliance is properly
grounded.