Keysight S5040A - Page 61

Keysight S5040A Open RAN Studio Player and Capture Appliance User’s Guide 61
Getting Started 2
Table 14 Actions in the Instrument Image Recovery System
Action# Action item Description
1 Run Check Disk on the system
drive.
Initiates a check disk on the hard drive
installed within the S5040A Appliance.
2 Recover the original factory system
image.
Initiates the process to recover and
restore the original image with the factory
settings.
3 View troubleshooting
documentation.
Displays a message “Please refer to your
instrument owner's manual.”, which is the
same as this document, where
information pertaining to troubleshooting
can found.
4 Repair the system drive. This feature is currently not supported.
Selecting this option displays a message,
“Feature not supported in UEFI mode.”
5 Exit and restart the instrument Exits the displayed window and restarts
the S5040A Appliance.