Keysight S5040A Open RAN Studio Player and Capture Appliance User’s Guide 67
Miscellaneous tasks on the S5040A Appliance 3
On successful completion, you will see the following window:
Figure 45 Window after firmware update on the S5040A Appliance
If the Firmware Update Progress area turns red, try updating the firmware
again. If unsuccessful after multiple attempts, contact your local Keysight
Technologies representative for technical assistance.
After a successful firmware update, close all open application and click
Shut Down. If you cannot shutdown immediately, click the Exit button.
The updated firmware will not be loaded into the Appliance until you shut
it down to a complete power off state.
To Next Page
Loading...