555
Driving your vehicle
• The windshield glass is fogged up;
a clear view of the road is obstruct-
ed.
• The vehicle in front is driving errat-
ically.
• The vehicle is on unpaved or
uneven rough surfaces, or road
with sudden gradient changes.
• The vehicle is driven near areas
containing metal substances as a
construction zone, railroad, etc.
• The vehicle drives inside a building,
such as a basement parking lot.
• The camera does not recognize
the entire vehicle in front.
• The camera is damaged.
• The brightness outside is too low
such as when the headlamps are
not on at night or the vehicle is
going through a tunnel.
• The shadow is on the road by a
median strip, trees, etc.
• The vehicle drives through a toll-
gate.
• The windshield glass is fogged up;
a clear view of the road is obstruct-
ed.
• The rear part of the vehicle in front
is not normally visible. (The vehicle
turns in other direction or the vehi-
cle is overturned.)
• The adverse road conditions cause
excessive vehicle vibrations while
driving.
• The sensor recognition changes
suddenly when passing over a
speed bump.
• The vehicle in front is moving verti-
cally to the driving direction.
• The vehicle in front is stopped ver-
tically.
• The vehicle in front is driving
towards your vehicle or reversing.
• You are on a roundabout and the
vehicle in front circles.
Driving on a curve
Forward Collision- Avoidance Assist
may be limited when driving on a
curved road.
OHM059343L
OHM059342L
To Next Page
Loading...
