Maintenance
847
Daytime running lamp (Bulb
type) bulb replacement (For
Canada)
1. Disconnect the negative (-) battery
terminal.
2. Disconnect the side after loosen-
ing the front bumper sides screws
and clips.
3. Disconnect the daytime running
lamp connector.
4. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
5. Remove the bulb from the socket
by pressing it in and rotating it
counter-clockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
6. Insert a new bulb by inserting it
into the socket and rotating it until
it locks into place.
7. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Headlamp (Low/High beam)
(LED type) bulb replacement
(Headlamp Type C)
If the headlamp (Low/High beam) (1)
does not operate, have the vehicle
checked by an authorized Kia dealer.
OYB070152L
OSC078038
To Next Page
Loading...
