Driving your vehicle
985
Warning Timing
With the ignition switch or ENGINE
START/STOP button in the ON posi-
tion, select 'Driver Assistance →
Warning Timing' from the User
Settings menu to change the initial
warning activation time for Rear
Cross-Traffic Safety.
When the vehicle is first delivered,
warning timing is set to 'Normal' If
you change the warning timing, the
warning time of other Driver Assist
functions may change.
Function operation
Function warning
Rear Cross-Traffic Safety will warn-
ing the driver when a collision is
imminent.
OJA050141L
CAUTION
• The setting of the Warning
Timing applies to all functions
of the Blind-Spot Safety sys-
tem.
• Even though 'Normal' is
selected for Warning Timing, if
the vehicles approaches at
high speed, the initial warning
activation time may seem late.
• Select 'Late' for Warning
Timing when traffic is light and
when driving speed is slow.
To Next Page
Loading...
