589
Driving your vehicle
To temporarily pause the func-
tion
Manually
If you want to pause temporarily
when Cruise Control is on, push the
CANCEL button.
The set speed will turn off but the
Cruise ( CRUISE) indicator will
stay on.
Automatically
Cruise Control will be paused when:
• Depress the brake pedal.
• Shift into N (Neutral)
• ESC (Electronic Stability Control)
is operating.
• Decrease the vehicle speed to less
than approximately 30 km/h (20
mph).
The set speed will turn off but the
Cruise ( CRUISE) indicator will
stay on.
To resume the function
Push the RES+ or SET- switch.
If you push the SET- switch down,
vehicle speed will be set to the cur-
rent speed on the cluster.
If you push the RES+ switch up, vehi-
cle speed will resume to the preset
speed.
Vehicle speed must be above 30
km/h (20 mph) for the function to
resume.
OSC050098
OSC050096