569
Driving your vehicle
✽✽
NOTICE
• BCW stands for Blind-Spot
Collision Warning.
• In the following text, Blind-Spot
Collision Warning will be re-
ferred as Blind-Spot Safety sys-
tem.
Detecting sensor
Refer to the picture above for the
detailed location of the detecting
sensor.
CAUTION
Warning timing may vary
depending on the speed of the
vehicle approaching at high
speed.
CAUTION
• Never disassemble the rear
corner radar or radar assem-
bly, or apply any impact on it.
• If the rear corner radar have
been replaced or repaired,
have your vehicle inspected
by an authorized Kia dealer.
• If there is impact on the rear
corner radar or near the radar,
even though the warning mes-
sage does not appear on the
cluster, Blind-Spot Safety sys-
tem may not operate properly.
In this case, have your vehicle
inspected by an authorized
Kia dealer.
• Use only genuine parts to
repair the rear bumper where
the rear corner radar is located.
• Do not apply license plate
frame or object, such as a
bumper sticker, film or a
bumper guard near the rear
corner radar.
(Continued)
OSC050091
■ Rear corner radar
To Next Page
Loading...
