571
Driving your vehicle
✽✽
NOTICE
If the engine is restarted, Blind-Spot
Safety system will maintain the last
setting.
Warning Timing
With the ignition switch or ENGINE
START/STOP button in the ON posi-
tion, select 'Driver Assistance →
Warning Timing' from the User
Settings to change the initial warning
activation time for Blind-Spot Safety
system.
When the vehicle is first delivered,
Warning Timing is set to 'Normal'. If
you change the Warning Timing, the
warning time of other Driver
Assistance systems may change.
WARNING
• If 'Warning Only' is selected,
steering is not assisted.
• If 'Off' is selected, the driver
should always be aware of the
surroundings and drive safely.
OJA050141L
CAUTION
• The setting of the Warning
Timing applies to all functions
of the Blind-Spot Safety sys-
tem.
• Even though 'Normal' is
selected for Warning Timing, if
the vehicles approaches at
high speed, the initial warning
activation time may seem late.
• Select 'Late' for Warning
Timing when traffic is light and
when driving speed is slow.
To Next Page
Loading...
