623
What to do in an emergency
6. Unscrew the valve cap from the
valve of the defective wheel and
screw filling hose (3) of the sealant
bottle onto the valve.
7. Insert the sealant bottle into the
housing of the compressor so that
the bottle is upright (B).
8. Ensure that the compressor is
switched off, position 0.
✽✽
NOTICE
If the sealant is injected when the
tire air pressure injection valve and
sealant injection hose are not fully
interlocked, the sealant may over-
flow and clog the valve.
✽✽
NOTICE
If a visable foreign object has punc-
tured the tire, do not remove it
before using Tire Mobility Kit.
9. Connect between compressor and
the vehicle power outlet (4) using
the cable and connectors.
OSC067012N OSC067013N OSC067014N
To Next Page
Loading...
