Page 11
Stratos HSSD-2 • INSTALLER’S HANDBOOK • Iss. 12
When the correct access code is entered, the display will show the main menu. The
current selection is always shown with an arrow after it. Press
or
to activate the
selection.
The choices available in the main menu are, in order:
Setup menu : contains all the user-programmable functions
Log menu : Allows the user to view historical information such as the event log (time
and date of various events such as alarm or fault conditions)
Diagnostic menu : Contains a number of detector self-tests
Reset : Clears any latched fault readings or exits from a menu item to its parent
menu. This has the same effect as pressing the <RESET> button.
Isolate : Isolates the detector. This has the same effect as isolating with the <ISOL>
button,
Exit : Exits programming mode
The main menu ‘wraps around‘ so that pressing
when in Setup menu brings up
Exit etc.
3.2 Main menu
NB ☞
To Next Page
Loading...
