Kidde Stratos-HSSD 2 - Page 5

Page 5
Stratos HSSD-2 • INSTALLER’S HANDBOOK • Iss. 12
4
2
1
3
8
9
5
1.3 Standard
Detector interior
view
1. Terminal block connections (see section 5.3.1)
2. RS485 terminal connections (see section 5.3.1)
3. 24VDC power supply connections (see section 5.4.1)
4. 1A 5 x 20mm T-type protection fuse
5. Detector address DIP switch (see section 8.1)
6. Front panel display connector
7. Filter removal tab (see section 10)
8. RS232 serial port (see section 8.5)
9. Safety earth studs (see section 5.4)
10. Display fixing screws (see section 5.2.1)
7
6
10