Kimo 210-R Series User Manual

➢ Press OK.
The backlight level blinks.
➢ Set it between 0 and 10 pressing Up and Down keys.
➢ Press OK.
4.3. Lock the keypad: F 140
For more safety and avoid any unwanted manipulation, it is possible to lock the keys of the transmitter.
“F 112” sub-folder is displayed.
➢ Press Up key.
“F 140” is displayed with “OFF” meaning that the locking is deactivated.
➢ Press OK.
“OFF” blinks.
➢ Press Up or Down key, “ON” blinks, then press OK.
“LOCK” is displayed for a few seconds then the transmitter displays the measured values.
All the keys are inactive.
To reactivate them:
➢ Press for 10 seconds on OK key.
“LOCK” blinks for a few seconds then the measured values are displayed and the keys are activated.
10 F 100: CONFIGURE THE TRANSMITTER

Kimo 210-R Series Specifications

General

Brand	Kimo
Model	210-R Series
Category	Transmitter
Language	English