Kinematica MEGATRON MT 3100 S2 - Installation; Mechanical Installation

39 pages

To Next Page

To Previous Page

INSTRUCTION MANUAL

System

MEGATRON

Type

MT 3100 S

Issue

3.1 / 29.01.2019

Page

3.1 INSTALLATION

3.1.1

MECHANICAL INSTALLATION

• The MEGATRON

has to be positioned on an even surface or foundation. En-

sure that no vibrations can be transmitted onto the MEGATRON

. Please

check if there is a sufficient air circulation.

• The working chamber has to be connected to the drive unit by using the quick

coupling. Simply push back the slide ring of the quick coupling, fit the working

chamber into the coupling and release the slide ring again.