Kinematica MEGATRON MT 3100 S2 - Spare Parts; Ordering of Spare Parts; Recommended Spare Parts

INSTRUCTION MANUAL
System
MEGATRON
®
Type
MT 3100 S
2
Issue
3.1 / 29.01.2019
Page
32
of
39
5 SPARE PARTS
Only original KINEMATICA spare parts will guarantee a trouble-free operation of the
machine.
See also “Technical Data” and the referenced documentation, drawings and parts
lists.
5.1 ORDERING OF SPARE PARTS
When ordering spare parts, please indicate:
1. Type of machine (e.g. MEGATRON
®
MT 3100 S²)
3. Serial-No. indicated on the machine data plate (e.g. 823-0017-01-02)
3. Position, description and ident number according to the Parts List (e.g. Pos. 1,
Shaft, 9750001)
5.2 RECOMMENDED SPARE PARTS
To avoid any inconvenience or time delays when handling service or repair cases, it is
strongly recommended to hold on stock some main and/or critical components like:
• Mechanical seal
• Ball bearings
• O-Rings
• Shaft
• Dispersing Generator(s)
Please bear in mind that some components have lead times of several weeks.
Do not hesitate to contact KINEMATICA for a corresponding quotation or advice.