• Push the ON/OFF button. In OFF position, the light of the main switch and
speed display will vanish and the system will shut down.
• Finally, close the inlet and outlet circuits (if applicable).
3.4 CLEANING
• If the processed media tends to harden or stick, the product has to be re-
moved completely from the working chamber after every use.
• If the machine is not operated for a longer time or before any maintenance
work is carried out, the working chamber has to be cleaned.
• There are different methods to clean the working chamber, depending on the
customer’s facilities:
o The product can be pushed out under pressure. Do not use higher pres-
sure than the normal working pressure to avoid damage to the me-
chanical seal and preventing the product from entering the bearing area
o Or the working chamber can be disassembled.
3.5 CHANGE LANGUAGE
• Hold down the Start, Navigate and Up key for >1s.
• Use the Up and Down arrows to select a language.
• Press the Navigate button to select.
To Next Page
Loading...