MACHINE / UNIT AS WELL AS FOR THE MAINTENANCE AND
REPAIR OF THE MACHINE / UNIT. HE MUST BE TRAINED
ACCORDINGLY TO CARRY OUT ALL NECESSARY
MAINTENANCE WORK
ENSURE THAT ALL LEGAL AND ENVIRONMENTAL
REGULATIONS OF THE COUNTRY WHERE THE MACHINE / UNIT
WILL BE INSTALLED ARE FOLLOWED
DO NOT MODIFY THE MACHINE / UNIT WITHOUT A WRITTEN
CONFIRMATION BY KINEMATICA
IT IS STRICTLY FORBIDDEN TO RUN THE MACHINE / UNIT WITH
DISASSEMBLED OR BRIDGED SAFEGUARDS, FOR EXAMPLE
SAFETY LIMIT SWITCH, EMERGENCY SWITCH OR COVER
FOR REPAIRS, ONLY ORIGINAL SPARE PARTS SHOULD BE USED
BEFORE STARTING INSPECTION AND MAINTENANCE WORK
ON THE MACHINE / UNIT (SERVICE, REPAIR ETC.), ALL POWER
SUPPLIES MUST BE DISCONNECTED
THE DRIVE UNIT MAY ONLY BE OPENED BY AUTHORIZED
KINEMATICA SERVICE STATIONS
SERVICE AND MAINTENANCE SHALL ONLY BE PERFORMED BY
AUTHORIZED AND SKILLED SERVICE ENGINEERS
AFTER EVERY INSPECTION AND MAINTENANCE WORK ON THE
MACHINE / UNIT (SERVICE, REPAIR ETC.), THE SERVICE
ENGINEER HAS TO DO A TEST-RUN
To Next Page
Loading...