Technical sheet
Inlet control solenoid valve.
Flushing solenoid valve
Minimum pressure switch.
Electronic leakage sensor
Maintenance notice
430 x 231 x 324
15.
3/8”
3/8”
3/8”
3/8” M-F*****
Pipe clamp
40 mm drain.
TECHNICAL SHEET
FOR REVERSE OSMOSIS EQUIPMENT
1. TECHNICAL CHARACTERISTICS
APPLICATION
Water treatment
Reverse Osmosis
Use
Improves the characteristics of drinkable water (that complies with the requirements of EU Directive on water for
human consumption 98/83 and its national transpositions in the various member states of the European Commu-
nity).
Modifications for reduction or intake
• The treatment of water through inverse osmosis is able to reduce the concentrations of sal and other substances
in high percentages.
• Minimum reduction* of specific compounds and parameters:
Sodium: 90%.
Calcium: 90%.
Sulphate: 90%.
Chloride: 90%.
Total hardness: 90%.
Conductivity: 90%.
* Based on the characteristics of the water to be treated (at the exit of the membrane). These values may vary de-
pending on the post-filter that is included in the equipment and/or settings of the mixing valve (if one is included).
OPERATIONAL LIMITS
EQUIPMENT WITH PUMP
Pressure (max./min.):
TDS (max.):
Temperature (max./min.):
Dureza (máx.):
4 bar - 1 bar (400kPa-100kPa).
1500ppm.
38 ºC - 5 ºC.
15 ºHF. **
Type of control:
Security System:
Dimensions (A x B x C en mm):
Weight (in kg, including all accessories):
Input connection:
Drain connection:
Tap connection:
Wall adapter:
Drain collar:
A
B
C
1. Drain
2. Faucet
3. Inlet
4. Power Grid
1 2 3
4
Technical Sheet
To Next Page
Loading...
Need help?
General
