King gates ELEVO - Default Chapter; Table of Contents

3
EN
Contents
1. General warnings 4
1.1 - Safety warnings 4
1.2 - Installation warnings 4
1.3 - Scrappin the product 4
1.4 - Disposing of exhausted battery 4
2. Product description 5
2.1 - Operating limits 5
2.2 - Typical system 5
2.3 - List of cables 5
2.4 - Main features of the control unit 6
2.3 - Technical features of the control unit 6
3. Installation 7
3.1 - Preliminary checks 7
3.2 - Fitting ELEVO 7
3.2.1 - Assembly of guide supplied GRO33 7
3.2.2 - Assembly of guide supplied GRO13 7
3.2.3 - Fitting the gearmotor to the guide 9
3.2.4 - Mounting the gearmotor to the ceiling 9
3.3 - Installation of other devices 10
3.4 - Electrical connections 10
3.5 - Connecting ELEVO to the mains 11
3.6 - Description of the electrical connections 11
4. Control unit setting 12
4.1 - Dip-switch adjustment 12
4.2 - Knob adjustment 12
5. Trasmitter (remote control unit) programming 13
5.1 - Start button programming 13
5.2 - Programming of the button linked to the “Lock/AUX”
output 13
5.3 - Programming of the button linkedto the on-board
courtesy light 13
5.4 - Deleting all memorised transmitter 14
5.5 - Deleting a single transmitter 14
5.6 - Remote (tools free) transmitter programming 14
6. Programming the door path 15
6.1 - Basic programming of the automation’s movement 15
6.2 - Advanced programming of the automation’s movement 16
7. Testing and commissioning 16
8. LED indication 17
8.1 - Input status indication LEDs 17
8.2 - Error status LED 17
9. RESET procedure 17
10. Devices connectable to the control unit 18
10.1 - Transformer 18
10.2 - Motor 18
10.3 - Warning light 18
10.4 - Aux contact 18
10.5 - Safety device 18
10.6 - 24V accessories’ power supply 19
10.7 - Wired commands 19
10.8 - Antenna 19
11. Advanced programming 20
12. Backjump adjustment 20
13. AUX output programming 21
13.1 - Selection of device connected to “Lock/AUX” output 21
13.2 - Selection of “Lock/AUX” output operating mode 22
13.3 - Selection of “AUX” output voltage 22
13.4 -
Selection of the type of devices connected to “S1 Edge” 23
14. Other functions 23
14.1 - Activating/deactivating the control unit protection device 23
15. F.A.Q. 24
16. Technical specications 25
17. CE Declaration of conformity 26