19
Pedal Assist Sensor Setting
The Direction of Pedal Assist Sensor Setting
Run means the running direction of pedal assist sensor. “run-F”
means forward direction, while “run-b” means backward direction.
Press UP/DOWN to select F or b, and press MODE to confirm and
turn to PAS sensitivity setting. The default direction is forward.
Direction of Pedal assistant sensor setting
The Sensitivity of PAS Sensor Setting
SCN means the sensitivity of PAS, and 2 to 9 can be selected. 2 is
strongest, 9 is the weakest. UP/DOWN is to select sensitivity value,
and MODE is to confirm selection and turn to Pedal assist sensor
ratio setting. SCN default value is 2.
The Sensitivity of PAS sensor setting
To Next Page
Loading...