23
pressing UP/DOWN from 25-40 Km/h. Shortly press MODE to
confirm and enter into Button walk mode enable setting. The
default is 40Km/h.
Max speed limit setting interface
This setting parameter is the upper limit specified by the display
manufacturer.
Button Walk Assist Enable Setting
PUS means button pushing walk assist. Press UP/DOWN to choose
Y/N. Y means enable, and hold DOWN to run at walk assist mode.
N means disable. Shortly press MODE to confirm and enter into
Push walk assist speed setting. The default value is Y.
Button Walk Assist Enable Setting
To Next Page
Loading...
Need help?
General
