20
PAS Sensor Proportion Parameter Setting
n means the proportion parameter of PAS. Press UP/DOWN to
select the parameter, the more power, the more PAS feeling. Hold
MODE to confirm and turn back to personalized parameter setting
interface.
Proportion parameter of PAS
Speed Sensor Selection
SPS means Speed sensor. It can be set according the magnet head
number on the e-bike wheel. Press UP/DOWN to select the
quantity of magnet head (the range is from 1 to 9), and hold MODE
to confirm and turn to personalized parameter setting interface.
SPS default value is 1.
Speed Sensor Selection
To Next Page
Loading...