King-Meter Digital II-LCD - Page 3

II
Password Enable ..................................................................... 12
Password Modification ............................................................ 12
Using Parameter Setting ......................................................... 13
Wheel Diameter Setting .......................................................... 14
Speed Limit Setting ................................................................. 14
Persona lized Parameter Setting...................................................... 15
Persona lized Setting Password Input ...................................... 15
Battery Indicator Setting ......................................................... 16
Pedal Assist Parameter Setting ............................................... 17
Pedal Assist Level Option ................................................ 17
Pedal Assist Ratio Modification ...................................... 17
Controller Over-Current Cut Setting ....................................... 18
Pedal Assist Sensor Setting ..................................................... 19
The Direction of Pedal Assist Sensor Setting .................. 19
The Sensitivity of PAS Sensor Setting .............................. 19
PAS Sensor Proportion Parameter Setting ...................... 20
Speed Sensor Selection ........................................................... 20
Throttle Function Setting (optional) ....................................... 21
Throttle Walk Assist Enable/Disable(optional) ............... 21
Throttle Vector Enable/Disable(optional) ....................... 21
System Setting ......................................................................... 22
Delay Time Setting of Battery Power .............................. 22
Max Speed Limit Setting ................................................. 22
Button Walk Assist Enable Setting .......................................... 23
Walk Assist Speed Setting ............................................... 24
Slowly Start up Setting .................................................... 24
Exit Setting ............................................................................... 25